Print placement

Stainless Tumbler Print Size: 20oz Wrap Dimensions

A stainless steel 20oz tumbler prints 9.25 x 7.91 inches (2776 x 2374 px at 300 DPI) as a full wrap. Here is how the taper affects the file.

Updated

Key takeaways
  • A stainless steel 20oz tumbler prints 9.25 x 7.91 inches (2776 x 2374 px at 300 DPI) as a full wrap. Here is how the taper affects the file.
  • Full wrap is 9.25 x 7.91 in.
  • The body tapers. Straight horizontal lines near the base will appear to curve upward once wrapped.
  • Avoid critical detail in the last inch at either end — that is where the seam closes.
  • All-over patterns forgive the taper. Precisely aligned geometric designs do not.

A tumbler is not a cylinder. It narrows toward the base, so a rectangular design wrapped around it pinches at the bottom and leaves a visible seam — the single most common tumbler mistake.

Every print position, measured

These are the actual print areas Printify produces for this product, read from their blueprint data rather than estimated. Pixel values are at 300 DPI.

Print positionInchesCentimetresPixels @ 300 DPI
Front9.25 x 7.91 in23.5 x 20.1 cm2776 x 2374 px

Placement that survives the real product

  • Full wrap is 9.25 x 7.91 in.
  • The body tapers. Straight horizontal lines near the base will appear to curve upward once wrapped.
  • Avoid critical detail in the last inch at either end — that is where the seam closes.
  • All-over patterns forgive the taper. Precisely aligned geometric designs do not.

The rule that overrides every chart: print areas are the maximum, not the target. Most strong designs use 70–85% of the available width and sit slightly above the geometric centre, because that is where the eye expects them on a worn or photographed product.

Print-ready files in one click

Resize any artwork to every print size at 300 DPI, without opening Photoshop.

Find your size →
Keep reading
Mug Print Size: 11oz Wrap DimensionsA white ceramic 11oz mug prints 8.27 x 3.82 inches (2480 x 1146 px at 300 DPI) as a full wrap.…20 oz Skinny Tumbler Design Size & Template DimensionsA 20 oz skinny tumbler needs a design about 9.3×8.2 inches on a full 8.5×11 sheet at 300 DPI.…Colour Mug Print Size: 11oz and 15oz DimensionsAn accent colour mug prints 8.25 x 4.25 inches (2475 x 1275 px at 300 DPI). Here is what…
Questions

Quick answers.

What size should a tumbler design be?

9.25 x 7.91 inches at 300 DPI, which is 2776 x 2374 pixels.

Why does my tumbler design look crooked?

The tumbler tapers toward the base, so straight lines wrap into curves. Patterns and organic artwork handle this far better than rigid geometry.

Where is the seam?

Where the wrap closes, at the left and right edges of your file. Keep important detail away from both ends.