Print placement

Mug Print Size: 11oz Wrap Dimensions

A white ceramic 11oz mug prints 8.27 x 3.82 inches (2480 x 1146 px at 300 DPI) as a full wrap. Here is how the handle splits it.

Updated

Key takeaways
  • A white ceramic 11oz mug prints 8.27 x 3.82 inches (2480 x 1146 px at 300 DPI) as a full wrap. Here is how the handle splits it.
  • Full wrap area is 8.27 x 3.82 in.
  • The centre of the file is the handle. Design two faces, or place one design off-centre so it sits on the visible side.
  • Keep artwork about a quarter inch clear of the rim and base — those edges curve away and ghost when pressed.
  • Right-handed drinkers see the left face of the wrap. Most sellers duplicate the design on both.

A mug is never seen whole. The handle divides the wrap into a left face and a right face, and a design centred in the file lands directly behind the handle where nobody will see it.

Every print position, measured

These are the actual print areas Printify produces for this product, read from their blueprint data rather than estimated. Pixel values are at 300 DPI.

Print positionInchesCentimetresPixels @ 300 DPI
Front8.27 x 3.82 in21.0 x 9.7 cm2480 x 1146 px

Placement that survives the real product

  • Full wrap area is 8.27 x 3.82 in.
  • The centre of the file is the handle. Design two faces, or place one design off-centre so it sits on the visible side.
  • Keep artwork about a quarter inch clear of the rim and base — those edges curve away and ghost when pressed.
  • Right-handed drinkers see the left face of the wrap. Most sellers duplicate the design on both.

The rule that overrides every chart: print areas are the maximum, not the target. Most strong designs use 70–85% of the available width and sit slightly above the geometric centre, because that is where the eye expects them on a worn or photographed product.

Print-ready files in one click

Resize any artwork to every print size at 300 DPI, without opening Photoshop.

Find your size →
Keep reading
Colour Mug Print Size: 11oz and 15oz DimensionsAn accent colour mug prints 8.25 x 4.25 inches (2475 x 1275 px at 300 DPI). Here is what…Stainless Tumbler Print Size: 20oz Wrap DimensionsA stainless steel 20oz tumbler prints 9.25 x 7.91 inches (2776 x 2374 px at 300 DPI) as a full…Mug Press Size Guide: 11oz vs 15oz TemplatesExact wrap template sizes for 11oz and 15oz sublimation mugs, safe-zone margins around the…
Questions

Quick answers.

What size should a mug design be?

8.27 x 3.82 inches at 300 DPI, or 2480 x 1146 pixels, for a full wrap.

Where does the handle sit on the print file?

At the centre. Split your design into two faces around it, or offset a single design so it lands on one visible side.

Should I print the same design on both sides?

Usually yes. A mug is seen one side at a time, and duplicating means it reads correctly whichever hand holds it.