Crewneck Sweatshirt Print Size: Exact Dimensions
A heavy blend crewneck sweatshirt prints at 15 x 17 inches (4500 x 5100 px at 300 DPI) on the front. Here is where to place it.
Updated
- A heavy blend crewneck sweatshirt prints at 15 x 17 inches (4500 x 5100 px at 300 DPI) on the front. Here is where to place it.
- Front print area is 15 x 17 in — portrait, and larger than a hoodie's.
- Standard placement starts around 2–3 inches below the collar seam. Ribbed crew collars sit higher than hooded ones.
- Back and inner neck label are separate print areas.
A crewneck has no pocket and no hood, which makes it the most forgiving garment in a print-on-demand catalogue — and the one most often printed too low. Without a hood to visually raise the neckline, a design placed at the same drop as a hoodie sits noticeably down the chest.
Every print position, measured
These are the actual print areas Printify produces for this product, not estimates. Pixel values are at 300 DPI, the resolution print files should be supplied at.
| Print position | Inches | Centimetres | Pixels @ 300 DPI |
|---|---|---|---|
| Front | 15 x 17 in | 38.1 x 43.2 cm | 4500 x 5100 px |
| Back | 15 x 17 in | 38.1 x 43.2 cm | 4500 x 5100 px |
| Inner neck label | 2.5 x 2.5 in | 6.3 x 6.3 cm | 750 x 750 px |
Placement that survives the real product
- Front print area is 15 x 17 in — portrait, and larger than a hoodie's.
- Standard placement starts around 2–3 inches below the collar seam. Ribbed crew collars sit higher than hooded ones.
- Back and inner neck label are separate print areas.
The rule that overrides every chart: print areas are the maximum, not the target. Filling the entire area is almost never the best-looking choice — most strong designs use 70–85% of the available width and sit slightly above the geometric centre, because that is where the eye expects them on a worn or photographed product.
Print-ready files in one click
Resize any artwork to every print size at 300 DPI, without opening Photoshop.
Quick answers.
What size should a sweatshirt design be?
15 x 17 inches at 300 DPI, or 4500 x 5100 pixels.
Is a sweatshirt print area the same as a hoodie?
No. A crewneck has a taller portrait area because there is no front pocket; the hoodie's is short and landscape.
How far below the collar should the design start?
Around 2–3 inches for an adult crewneck. Ribbed collars sit higher, so the same drop as a hoodie will look too low.